Oxoklin® Powder High-level disinfectant TP4
Potential discount how much can it go down in the basket, roughly până la −27.1%
Prețul de pe acest produs e cel contractual. Discountul de mai jos se aplică pe întreg coșul la checkout, nu per produs — deci e o estimare pentru contul tău.
Oxoklin® Powder disinfectant TP4
Oxoklin Powder gives you total control over critical hygiene when time matters. Soluble powder that generates peracetic acid in situ, effective even at low temperatures. Biodegradable, stable and economical – with included dosing scoop (≈17 g) for correct dilutions from the start.
Disinfect surfaces in 5–15 minutes (bactericidal/yeasticidal/mycobactericidal), virucidal spectrum according to EN 14476 (enveloped viruses in 5 min; general in 30 min) and odor control caused by microorganisms.
Reduce the risk of contamination and non-conformities; quickly prepare the solution (0.5–5%), wait 15 minutes for activation, and work within the safe 8-hour window.
1) Dissolve in water at ~30°C → 2) Wait 15 min for activation → 3) Apply: spraying/wiping/immersion → 4) Observe the target time (e.g., bactericidal 5 min; fungicidal 15–60 min; general virucidal 30 min) → 5) Rinse only on surfaces with direct food contact.
One product – multiple scenarios: equipment, containers, packaging lines, storage/transport/serving areas, consumer utensils (5%/20 min immersion). Compatible with stainless steel, PVC, PP, PE, silicone, glass, rubber.
⚠️ Avoid copper and iron; not recommended for disinfection on damaged chrome/nickel.
If you decide based on standards (External Frame): Efficacy according to EN 13697, EN 1276, EN 1650, EN 14476, EN 14348; in accordance with ISO 14885:2022.
See, smell, feel the result: clean, odor-free, repeatable process, cost per cycle under control.
Plan dilutions, label the solution with the preparation time, close the container, execute batch by batch.
Need it now? Prepare 0.5% for quick surface interventions; 5% for fungicidal action on utensils (immersion).
It works like the oxidants you know, only that dissolution is easy, activation is predictable, and the use window is clear (8 h).
The powder does not drip, is not wasted, it is dosed precisely; unpleasant odors are neutralized at the source.
Dilute. Activate. Disinfect. – and performance, every time.
Optimize your protocol: select the concentration (0.5–5%), choose the method (spray/wipe/immersion) and close the hygiene loop in 5–60 minutes.
OXOKLIN powder – your daily standard of safety, simplicity and efficiency.
Main benefits
- Rapid oxidative action (bactericidal, yeasticidal/fungicidal, virucidal).
- Efficient even at low temperatures; chemically stable.
- Biodegradable; delivered with a measuring spoon (1 spoon ≈ 17 g).
-
Compatible with multiple materials (stainless steel, PVC, PP, PE, silicone, glass, rubber).
⚠️ Not recommended for copper; corrodes iron; avoid damaged chrome/nickel instruments.
Recommended for
- Surfaces of equipment, containers, consumer utensils.
- Storage, transport and serving areas for food/beverages (with rinsing after contact time).
- Areas: industrial, professional, public.
Physico-chemical characteristics
- Form: white powder, water-soluble.
- pH of 0.5% solution: 9.5 ± 0.5.
Instructions for use
Prepare the solution (0.5–5%) in water at ~30 °C, wait 15 minutes for activation, then apply by spraying/wiping or immersion. The solution is valid for a maximum of 8 hours, stored in a closed container, protected from light.
🔽 Step-by-step application details
- Prepare the solution: minimum 0.5% w/v (0.5–5%) in water (ideally ~30 °C) and homogenize until completely dissolved.
- Activate: wait 15 minutes for in situ generation of peracetic acid.
- Choose the technique: manual spraying, wiping with a synthetic cloth (polyester/PE), or immersion.
- Observe contact times according to the efficacy table.
- Surfaces in direct contact with food: rinse with potable water after contact time.
- Shelf life: use the solution within a maximum of 8 hours; store in a closed container, protected from light, at room temperature.
- PPE: wear gloves, clothing, and eye/face protection according to the SDS.
Recommended uses
- Spraying/wiping surfaces: 0.5–5%, depending on the targeted efficacy (see efficiency table).
- Immersion of consumer utensils: 5% for 20 minutes, then rinse with potable water.
ℹ️ Note: The prepared solution is valid for a maximum of 8 hours; mandatory rinsing for surfaces in direct contact with food; observe the use of personal protective equipment according to the SDS.
Validated in the lab. Effective in the field.
🔬 Efficacy tests: Approval from the National Commission for Biocidal Products – No. 6412BIO/04/12.30.
Efficacy & contact time table
Spectrum covered
| Activity | Eliminated species/strain |
|---|---|
| Bactericidal | Staphylococcus aureus, Enterococcus hirae, Escherichia coli K12, Pseudomonas aeruginosa |
| Gram-positive bacteria | Staphylococcus aureus, Enterococcus hirae |
| Gram-negative bacteria | Escherichia coli K12, Pseudomonas aeruginosa |
| Yeasticidal/Fungicidal | Candida albicans, Aspergillus brasiliensis |
| Virucidal | According to EN 14476: enveloped viruses (Vaccinia MVA) and non-enveloped test viruses (Adenovirus type 5, Poliovirus type 1, Murine Norovirus) – depending on concentration and time |
| Mycobactericidal | Mycobacterium avium |
| Tuberculocidal | Mycobacterium terrae |
Instructions for use
| Method/Purpose | Application dose | Action time |
|---|---|---|
| Spraying, wiping: Bactericidal, Yeasticidal | 0.4% at 20 °C | 15 min |
| Spraying, wiping: Fungicidal | 5% at 20 °C | 15–20 min |
| Spraying, wiping: Mycobactericidal/Tuberculocidal | 0.5% at 20 °C | 15 min |
| Spraying, wiping: Virucidal (enveloped) | 0.5% at 20 °C | 5 min |
| Spraying, wiping: Virucidal (general) | 0.5% at 20 °C | 30 min |
| Immersion of consumer utensils | 5% (total coverage) | 20 min → rinse with potable water |
