Klintensiv® Aminoquat - Concentrated disinfectant
Potential discount how much can it go down in the basket, roughly până la −27.1%
Prețul de pe acest produs e cel contractual. Discountul de mai jos se aplică pe întreg coșul la checkout, nu per produs — deci e o estimare pentru contul tău.
Klintensiv® Aminoquat – Concentrated disinfectant
Deep cleaning. True disinfection.
With over 95% satisfaction rate in hospitals and clinics in Romania, KLINTENSIV® AMINOQUAT is the choice of healthcare professionals who do not compromise.
Now you too can have the same level of protection - in your office, salon, or any space where hygiene truly matters.
✅ Tested and approved according to European standards
✅ Broad spectrum – bacteria, viruses, fungi, yeasts, mycobacteria
✅ Proven action and effectiveness even in the presence of dirt
Main benefits:
- Over 90% biodegradable
- Does not stain or discolor surfaces
- Demonstrated effectiveness in real dirt conditions
- Efficient cleaning due to included surfactants, non-foaming
Recommended for:
- Non-porous hard surfaces in hospitals, clinics, ambulances, mobile units, etc.
Physical and chemical characteristics:
- Translucent, light green, concentrated liquid, with a specific smell
- Concentrated product pH: 10.7 – 11.1
- Water-soluble
Instructions for Use
For optimal efficiency, observe dilution recommendations and the appropriate application technique.
🔽 Preparation and application method
- Shake the container well before use
- Dilute 0.5–5% in potable or distilled water
- Example: 75 ml concentrate + 9.925 L water = 10 L 0.75% solution
- Apply to clean or dirty surfaces
🔽 Application techniques
- Manual sprayer
- Wiping with a synthetic cloth (polyester / polyethylene)
- Immersion in a tub / container
- Recirculating cleaning system
Recommended uses
- Disinfection of medical surfaces and instruments
- Disinfection of aspiration systems
- Medical areas, common spaces, mobile units, etc.
ℹ️ Note: Recommended quantity: 4–10 ml/m². Contact time: 5–60 minutes depending on concentration and type of microorganism. The diluted solution is valid for a maximum of 7 days.
Validated in the lab. Efficient in the field.
🔬 Efficacy Tests: Approval No. 6328BIO/02/12.30 – National Commission for Biocidal Products
Efficacy & contact time table
Covered spectrum
| Type of pathogen | Relevant eliminated species/strains | Notes |
|---|---|---|
| Gram-positive bacteria | Staphylococcus aureus, Enterococcus hirae | Broad spectrum; pre-cleaning recommended for visible dirt. |
| Gram-negative bacteria | Pseudomonas aeruginosa, Escherichia coli K12 | High efficiency |
| Mycobacteria | Mycobacterium avium, Mycobacterium terrae | Requires extended time (30–60 min); uniform coverage and keeping the surface wet are recommended. |
| Fungi / Yeasts | Candida albicans, Aspergillus brasiliensis | Includes resistant strains; contact 15–60 min depending on species and method. |
| Enveloped viruses | Vaccinia virus (MVA), Coronavirus, Filoviridae, Flavivirus, HBV, HCV, HDV, Herpesviridae, HIV, HTLV, Influenza, Measles, Paramyxoviridae, Poxviridae, Rabies, Rubella | Broad spectrum according to EN 14476; rapid action: 5 min - 30 min. |
Instructions for use
| Method / Efficacy | Application dose | Action time |
|---|---|---|
| Spray, wipe / Bactericidal (including MRSA) | 0.2–0.7% (4–10 ml/m²) | 5 min |
| Spray, wipe / Yeasticidal | 0.3% (4–10 ml/m²) | 15 min |
| Spray, wipe / Fungicidal | 0.75% (4–10 ml/m²) | 15 min |
| Spray, wipe / Mycobactericidal, Tuberculocidal | 5% (4–10 ml/m²) | 30 min |
| Spray, wipe / Mycobactericidal, Tuberculocidal | 1% (4–10 ml/m²) | 60 min |
| Spray, wipe / Virucidal (enveloped viruses) – rapid action | 5% (4–10 ml/m²) | 5 min |
| Spray, wipe / Virucidal (enveloped viruses) – extended action | 0.5% (4–10 ml/m²) | 30 min |
| Immersion (instruments) / Bactericidal | 0.5% | 60 min |
| Immersion (instruments) / Fungicidal | 0.5% | 60 min |
| Immersion (instruments) / Mycobactericidal, Tuberculocidal | 1% | 60 min |
