Klintensiv® Atomizer – 2L, 24V
Potential discount how much can it go down in the basket, roughly până la −27.1%
Prețul de pe acest produs e cel contractual. Discountul de mai jos se aplică pe întreg coșul la checkout, nu per produs — deci e o estimare pentru contul tău.
Klintensiv® Atomizer – 2L, 24V
Fine spray for quick disinfection, 5-8 m coverage
The Klintensiv® atomizer is designed to finely spray liquid disinfectants from the Klintensiv range, ensuring uniform and highly effective coverage without subsequent wiping*. Ideal for healthcare facilities, home, office, HoReCa, schools, and car fleets.
*When used with the appropriate solution for the application (e.g., HOCl Klintensiv®), it can eliminate up to 99.9% of bacteria, viruses, and fungi and is safe for food contact surfaces, according to the intended use of the product.
✔ Use Klintensiv disinfectant for maximum protection
✔ No wiping required after application (check solution instructions)
✔ No aggressive fumes, no sticky residue
Key Benefits
- Long jet 5-8 m (in windless conditions) for rapid coverage of large surfaces
- Adjustable flow rate 80-150 ml/min for optimal dosing and reduced consumption
- Droplets under 50 µm for a fine film and short drying time
- Autonomy 50–60 min on a single charge; full charge ~4h
- 2 L tank – fewer refills, increased productivity
- Portable, ergonomic, easy to operate
Areas of use
Hospitals and clinics, offices, restaurants & cafes, hotels, schools/kindergartens, commercial spaces, conference rooms, reception areas, personal and fleet vehicles, warehouses/logistics, common living spaces.
Technical specifications
- Power supply voltage (battery): 24 V DC
- Battery capacity: 8 Ah
- Rated power: 240 W
- Spray rate (adjustable): 80 – 150 ml/min
- Droplet size: < 50 microns
- Jet/mist coverage (wind-free): 5 – 8 m
- Tank capacity: 2 liters
- Full charge time: ~4 hours
- Autonomy per charge: 50 – 60 minutes
- Package dimensions: 68.5 × 27.5 × 18 cm
How to use
- Fill the tank with Klintensiv liquid disinfectant suitable for the application (low viscosity, water-based).
- Turn on the device and set the flow rate according to the surface/volume.
- Spray from 1–2 m for nearby objects/surfaces and adjust the distance for coverage up to 5–8 m.
- Observe the contact time indicated by the disinfectant product.
- Wiping is not necessary if the chosen product specifies “no rinse/wipe”.
Compatibility & safety recommendations
- Compatible with liquid water-based disinfectants from the Klintensiv range (e.g., HOCl, QAC RTU, low alcohol content if permitted by the solution manufacturer and working conditions).
- Do not use gels, highly viscous solutions, solutions with solid particles, or solvents/high-concentration alcohol (risk of flammability).
- Clean the tank and circuit by rinsing with water when changing the solution.
- Use PPE according to the sprayed product's datasheet (gloves/goggles/mask, as appropriate).
- Keep out of reach of children. Avoid contact with eyes/skin. Ventilate the area.
